configure inline-power operator-limit
ports
configure inline-power operator-limit [milliwatts | class-based] ports [all |port_list]
Description
Sets the power limit allowed for PDs connected to the specified ports.
Syntax Description
|
milliwatts
|
An integer specifying the maximum allowed power in milliwatts.
Default is based on the port's class type (for example, 30W, 60W,
90W). |
| class-based |
Specifies that the power limit is managed by the
powered device's class. |
|
port_list
|
Specifies one or more ports or slots and
ports. |
Default
PoE—15,400 mW.
PoE+—30,000 mW.
PoE++ Type 3—60,000 mW.
PoE++ Type 4—90,000 mW.
Usage Guidelines
This command sets the power limit that a PD can draw on the specified
ports. For PoE, the range is 3,000 to 16800mW and the default value is 15,400 mW.
For PoE+, the range is 3,000 to 32,000 mW and the default value is 30,000 mW. For
PoE++ Type 3, the range is 3,000 mW to 64,000 mW and the default value is 60,000 mW.
For PoE++ Type 4, the range is 3,000 mW to 98,000 mW and the default value is 90,000
mW.
If the measured power for a specified port exceeds the port‘s operator limit, the
power is withdrawn from that port and the port moves into a fault state.
If you try to set an operator-limit outside the accepted range, the system returns
the following error message:
Error: Invalid operator-limit value. Must be in the range of 3000-90000 mW for PoE 802.3bt port
With a class-based operator-limit type, if a class4 PD is attached,
then the operator-limit set will be ignored and the switch will not deliver more
than 30W to the PD.
When class-based operator-limit is configured on a
port, "Max Allowed Power" will show the maximum power for the class of the attached
PD. Without the class-based option, "Max Allowed Power" will show
the configured or default value of operator-limit.
Example
The following command sets the limit for legacy PDs on ports 3–6 of slot 5 on a
SummitStack to 10000 mW:
configure inline-power operator-limit 10000 ports 5:3-5:6
History
This command was first available in ExtremeXOS 11.1.
The class-based option was added in ExtremeXOS 32.3.
Platform Availability
This command is available on:
PoE+
- ExtremeSwitching
5420F-8W-16P-4XE—ExtremeXOS 31.3 and
later.
- ExtremeSwitching
5420F-24P-4XE—ExtremeXOS 31.3 and
later.
- ExtremeSwitching
5420F-16MW-32P-4XE—ExtremeXOS 31.3 and
later.
- ExtremeSwitching
5420F-16W-32P-4XE—ExtremeXOS 31.3 and
later.
- ExtremeSwitching
5420F-48P-4XE—ExtremeXOS 31.3 and
later.
- ExtremeSwitching
5420F-48P-4XL—ExtremeXOS 31.3 and
later.
- ExtremeSwitching
5420M-16MW-32P-4YE—ExtremeXOS 31.3 and
later.
- ExtremeSwitching
5320-48P-8XE—Switch Engine 31.6 and
later.
- ExtremeSwitching
5320-24P-8XE—Switch Engine 31.6 and
later.
- ExtremeSwitching
5320-16P-4XE—Switch Engine 31.7 and
later.
- ExtremeSwitching
5320-16P-4XE-DC—Switch Engine 31.7 and
later.
- 4220-12P-4X—Switch Engine 32.7.1 and
later.
- 4220-24P-4X—Switch Engine 32.7.1 and
later.
- 4220-48P-4X—Switch Engine 32.7.1 and
later.
- 4220-4MW-8P-4X—Switch Engine 32.7.1
and later.
- 4220-4MW-20P-4X—Switch Engine 32.7.1
and later.
- 4220-8MW-40P-4X—Switch Engine 32.7.1
and later.
PoE++
- ExtremeSwitching 5520-24W—ExtremeXOS 31.1 and later.
- ExtremeSwitching 5520-48W—ExtremeXOS 31.1 and later.
- ExtremeSwitching 5520-12MW-36W—ExtremeXOS 31.1 and later.
- ExtremeSwitching 5420F-8W-16P-4XE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420F-16MW-32P-4XE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420F-16W-32P-4XE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420M-24W-4YE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420M-16MW-32P-4YE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420M-48W-4YE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5720-24MW—Switch Engine 32.1 and later.
- ExtremeSwitching 5720-24MXW—Switch Engine 32.1 and later.
- ExtremeSwitching 5720-48MW—Switch Engine 32.1 and later.
- ExtremeSwitching 5720-48MXW—Switch Engine 32.1 and later.
- 4120-24MW-4Y—Switch Engine 32.7 1 and
later.
- 4120-48MW-4Y—Switch Engine 32.7 1 and
later.
- 4220-4MW-8P-4X—Switch Engine 32.7 1 and
later.
- 4220-4MW-20P-4X—Switch Engine 32.7 1 and
later.
- 4220-8MW-40P-4X—Switch Engine 32.7 1 and
later.
